1. Safety Inspection Before Lifting The safety inspection before using the lift can clearly understand the use status, maintenance, and maintenance needs of the equipment to ensure the normal operation of the equipment and that it is in a good working condi...

During vehicle maintenance and repair processes, the scissor lift is used very frequently. Although the scissor lift is simple to operate, all safety inspections and precautions are indispensable; otherwise, safety accidents are likely to occur. The safe ope...

I. Foundation Preparation Before Installation To avoid equipment tilting, abnormal noise, or even overturning due to insufficient foundation strength, before installing the lifting equipment, we should ensure that the newly poured concrete has been cured ...

In the process of vehicle maintenance and repair operations, the two-post lift is the most widely used and frequently used lifting equipment. However, if it is not operated in accordance with safety regulations during use, it is likely to cause personal and ...

I. Foundation Preparation Before Installation To prevent equipment tilting, abnormal noise, or even overturning due to insufficient foundation strength, ensure that newly poured concrete has cured for over 20 days before installing lifting equipment. Differ...

To avoid equipment tilting, abnormal noise, or even overturning caused by insufficient foundation strength, ensure that newly poured concrete is cured for over 20 days before installing lifting equipment. Different types of lifts must meet the following cond...

The grand AMR 2018 Beijing Automotive Maintenance Exhibition was held! J&F shone again at the exhibition, bringing products like high-precision balancers and new-generation intelligent lifts. At this exhibition, our equipment, featuring intelligent operation...

AMR 2019 Beijing International Automotive Maintenance & Parts Exhibition has concluded successfully! J&F exhibited a series of innovative equipment at the exhibition, among which the globally launched intelligent lifts and Asia-launched high-precision balanc...

Shanghai, November 29-December 2, 2017 — The 13th Automechanika Shanghai opened grandly. The exhibition area increased by 9% to 340,000 square meters, covering 15 halls of the National Exhibition and Convention Center (Shanghai) for the first time. The...

AMR 2017 Beijing International Automotive Maintenance Equipment Exhibition has come to a successful end! J&F participated in the exhibition with advanced garage equipment, including the newly upgraded tire changers and intelligent lifts. During the exhibit...